VGP ballast weight of 500 KG

• 12 slots for LO25 KG weights
• Reserve for weight adjustment by adding lead
• Possibility to certify weights according to OIML or ASTM standards
• Refer to the required class according to the standard

In the case of slinging, it is important to use the 4 designated points for this purpose. It is also recommended to overload the weights within the limit of the number of additional masses provided by the housings.

The storage of ballast masses in stacked mode must take into account the permissible loads and the flatness of the floors. For a periodic general inspection (PGI) at least every 12 months for overhead cranes, hoists, winches, and every 6 months for forklifts, aerial work platforms...